Calibrating a Swiss Ronda Chronograph Movement
Here is a brief description of how to calibrate the a chronograph movement by Ronda: Pull out the crown all the way, press both pushers to enter calibration mode. Now calibrate the central second hand by pressing upper pusher, when finished press the lower pusher, you can now calibrate the hours (at 6) by pressing the upper pusher, press the lower pusher once more to adjust the minutes (at 9), press the upper pusher to calibrate. Once finished push in the crown again. Congratulations, you have now calibrated your chronograph!
Ruhla NVA Kampfschwimmer Taucheruhr Divers Watch hands on / review
This watch is a remake of a special divers squad watch of the NVA. It bears the original markings such as "Eigentum der NVA". Is highly limited (comes with a certificate) and has the authentic dial, case, clasp and strap. It is 100% Made in Germany of course, even the movement was developed and built in Germany. It illuminated nicely (see the demo of this all the way at the end). It is tested for depths of up to 200m.
Apus Epsilon Black & White
Two new arrivals at watch-shop.com: the Apus Epsilon White and Black. They both feature a soft and comfortable PU strap. The display has a bright red LED.
Apus Epsilon White
Apus Epsilon Black
Swapping leather straps on a watch / Lederband einer Uhr wechseln
Many people ask us how to swap a leather band / strap on a wristwatch, it is a fairly easy procedure and can be acomplished in a few moments: One needs a tool for pushing in the pin that usually hold a strap in place and with that one must squeeze the pin from the side to remove it. It can be a bit tricky to get the pin depending on the watch but with a bit of patience it can easily be accomplished.
Junkers 6252-4 Automatic Hands on Review
A quick look at a Junkers 6252-4 Automatic watch by Junkers. This watch is Made in Germany, has an automatic movement and a very nice strap. As you can see if fits a wrist nicely.
